Bitumen primer K-80

How to use:
Clean and dry the surfaces to be treated, if necessary. Use a brush or a roller to apply or spray with one layer of Bitumen solution K-80. The surface must be completely dry before it is treated further. Consumption 0.2…0.4 l/m2. Stains and tools are cleaned up mechanically, using white spirit or mineral turpentine.

PLEASE NOTE: Do not apply to a hot surface, mix with hot bitumen or brush the coated surface with hot bitumen immediately after the application.

Drying time around 2-3 hours at + 20 °C, depending on the thickness of the layers. In cold, damp conditions, the drying time may be many times longer.

In a dry place protected against sunlight and heat.

Instructions for environmental protection:
Empty package and a dried product can be taken to a landfill. Waste including fresh product is hazardous waste, which needs to be disposed of in accordance with waste management legislation and instructions from the environmental authorities.

  • Bitumen primer K-80
  • -
  • -
  • -